Skip to content

Craftsmanspace

craftsmanspace.gif
 
 You are here: Home

Login Form






Lost Password?
No account yet? Register
Please enter a valid e-mail address. You will need to confirm your e-mail address to activate your account.

Newsletter

Join the Craftsmanspace Mailing List to receive an occasional free newsletter






Planter Benjamin - Free woodworking project plan


Download this plan in PDF (Adobe Acrobat) format with high resolution pictures - 16 Pages;  4,14Mb


planter_benjamin.jpg
      You can use many kinds of wood for making this Planter, but we recommend you to purchase some wood with nice texture. If you are planning to paint the Planter, the texture of a selected wood is not important.   
   You can make this Planter by the measurements given in this project, but we recommend you to see what dimensions are right for your plant (by the measurements of the space you choose to put him to) and then adjust the whole project to proper dimensions. By this way, the Planter will perfectly fit to your own needs.
    Make all the items precisely by the measurements given on particular 2D drawings. Pay special attention while drilling the holes (diameter D22m) on the Side Long (item 1) and Side Short (item 2).
    The measurements are given in millimeters, and the measurements in inches are given in brakes (1 inch = 25, 4 mm).     


 Parts List
 Parts_list_LR.jpg
 
 


2D Documentation
Assembly Drawing

 Assembly_LR.gif
 1. Side Long
 1_Side Long_LR.gif
 2. Side Short
 2_Side Short.gif
 3. Delimiter
 3_Delimiter.gif
 4. Crossbar
 4_Toggle.gif
 5. Bottom Lath
 5_Bottom Latch.gif
 6. Pin (Dowel)
 6_Pin.gif
 9. Leg
 9_leg.gif
 Standard Parts
 Standard Parts.jpg
 
 Assemblage instructins
 
 1.  Put the Side Long (items 1) on the Side Short (items 2) and carefully hammer the Pin (items 6) through these items.
 Planter_Benjamin_1a.jpg  Planter_Benjamin_1b.jpg
  2.  Fasten the Crossbar (items 4) to the assembly from the previous picture with Nail D3,1x70mm (items 7).
 Planter_Benjamin_2a.jpg  Planter_Benjamin_2b.jpg
 Planter_Benjamin_2c.jpg  Planter_Benjamin_2d.jpg
  3.  Fasten the Bottom Lath (items 5) to the assembly from the previous picture with Nail D2,2x50mm (items 8).
 Planter_Benjamin_3a.jpg  Planter_Benjamin_3b.jpg
 4.  Attach the Delimiter (items 3) with glue to the assembly made in the previous step.
 Planter_Benjamin_4a.jpg  Planter_Benjamin_4b.jpg
  5. Tamp down the 4 remaining Side Long (items 1) and the Side Short (items 2) to the assembly made in the  previous step. 
 Planter_Benjamin_5a.jpg  Planter_Benjamin_5b.jpg
 6. Fasten the Leg (items 9) to the assembly made in the previous step by using Wood Screw D5x70mm (items 10).
 Planter_Benjamin_6a.jpg  Planter_Benjamin_6b.jpg



Bookmark this page and share it with others
Digg!Reddit!Del.icio.us!Google!Live!Facebook!Slashdot!Netscape!Technorati!StumbleUpon!Spurl!Wists!Newsvine!Furl!Yahoo!Netvouz!Ma.gnolia!Squidoo!Free social bookmarking plugins and extensions for Joomla! websites!
 
About us
Disclaimer