Tripod Easel or Stand Plan |
Download this plan in PDF (Adobe Acrobat) format with high resolution pictures - Pages 10; 1,33Mb
Making of this easel requires not much of your time
and you don’t need to have some special skills. All you have to do is
to precisely make the items with the exact measurements as it is shown in
this documentation, then join those parts together with bolts.
You can use various types of wood to make this
type of easel, but we recommend birch, beech, oak, maple, ash, alder,
or some other types with similar qualities. Pay attention, to choose
some well dried wood.
| Parts List |
 |
| |
| |
|
 |
 |
|
| |
|
2. Fasten the Middle Plank (Part 1) and the Side Planks (Part 2) by using Axle (Part 3), Washers D8mm (Part 8), Spring Lock Washers D8mm (Part 10) and Wing Nuts M8 (Parts 9)
|
 |
 |
 |
 |
| |
|
3. Fasten the Horizontal Plank (Part 4) to the subassembly made in the previous step by using Bolts M6 x 90mm (Part 5), Washers D6mm (Part 6) and Wing Nuts M6 (Part 7)
|
 |
 |
 |
 |
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
