Wall Shelf - Free furniture plan |
Download this plan in PDF (Adobe Acrobat) format with high resolution pictures - Pages 17; 4,64Mb
|
You can use various types of wood for this project manufacture. We recommend purchasing some wood with a nice, interesting texture like ash, beech, cedar, birch, cherry, maple, oak, walnut, etc. If you are planning to paint the Wall Shelf by yourself, the texture of wood is not important.
Make all the items precisely by the
measurements given on particular 2D drawings. The measurements are
given in millimeters, and the measurements in inches are given in
brakes (1 inch = 25, 4 mm).
|
Parts List
|
 |
| |
| |
|
 |
 |
|
| |
|
| 2. Attach the Round Bars (item 4) to the subassembly made in the previous step with glue. |
 |
 |
| |
|
| 3. Push the Shelf parts (item 1) into mortises on the Side Mirror (item 7) and fasten them with Wedges (item 3). |
 |
 |
|
|
| |
|
| 4. Put some glue into the holes on the Side (item 2). In this holes comes Dowel Pins D6mm (item 6) and Round Bars (item 4). Then attach the Side (item 2) to the subassembly made in the previous step. |
 |
|
| |
|
| 5. Tamp the Wedges (item 3) down with the hammer into the holes on the Shelves (item 1). |
 |
 |
 |
|
| |
|
| 6. Fasten the Holder Plates (item 8) to the subassembly made in the previous step with the Wood Screws (item 9). |
 |
 |
 |
|
| |
|
7. All what is left to do, is to drill the holes in the wall on with the following distance between them. The measurement from the bottom picture should be taken just informatively. It would be best to measure the real distance on your assembly.
|
 |
| |
|
| Put the Fisher Plugs 8 (item 11) into the holes and screw the Screws D5x60mm (item 10) in it. But do not screw them entirely, but left the head screw to stick out a few millimeters (approx. 5-8mm from the wall) so you could hang the self. |
 |
|
| |
|
|
