Wooden Pillow - Free woodworking plan |
Download this plan in PDF (Adobe Acrobat) format with high resolution pictures - Pages 9; 2,54Mb
 |
|
You can use various types of wood for making this project. We recommend purchasing some wood with a nice, interesting texture like ash, beech, cedar, birch, cherry, maple, oak, walnut, etc. If you are planning to paint the Planter, the texture of a selected wood is not important.
Make all the items precisely by the measurements given on particular 2D drawings. The measurements are given in millimeters, and the measurements in inches are given in brakes (1 inch = 25, 4 mm).
|
| |
Parts List
|
 |
| |
| |
2D DOCUMENTATION
Assembly Drawing
|
 |
| |
1. Holder
|
 |
| |
2. Crossbar
|
 |
| |
3. Pin D8 x 30mm (Dowel)
|
 |
| |
ASSEMBLAGE INSTRUCTIONS
1. Drill the holes (diameter 8mm) on the Crossbars (items 2) by following the 2D documentation.
|
 |
| |
|
| 2. Put the Centers into the holes on one side of the Crossbar (item 2) and mark the points, where this centers are touching the midlle of the Holder (item 1). Drill the holes on this point. |
 |
 |
 |
 |
 |
|
| |
|
| 3. Attach the Crossbar (item 2) and Pins D8 x 30mm (items 3) to the Holders (items 1). |
 |
 |
| |
|
4. By following the 2D documentation, mark and drill the rest of the holes on the Holders (items 1), in the same way as in step 2 and attach rest of the Crossbars (items 2) and Pins D8 x 30mm (items 3) to the subassembly made in the previous step.
|
 |
 |
 |
|
| |
|
|
