Early in the present century the method generally adopted for polishing furniture was by rubbing with beeswax and turpentine or with linseed-oil. That process, however, was never considered to be very satisfactory, which fact probably led to experiments being made for the discovery of an improvement. The first intimation of success in this direction appeared in the Mechanic's Magazine of November 22, 1823, and ran as follows: "The Parisians have now introduced an entirely new mode of polishing, which is called plaque, and is to wood precisely what plating is to metal. The wood by some process is made to resemble marble, and has all the beauty of that article with much of its solidity. It is even asserted by persons who have made trial of the new mode that water may be spilled upon it without staining it." Such was the announcement of an invention which was destined ultimately to become a new industry. The following pages commence with a description of the art of French Polishing in its earliest infancy, care having been taken by the Author, to the best of his ability, to note all the new processes and manipulations, as well as to concisely and perspicuously arrange and describe the various materials employed, not only for French polishing but for the improving and preparation of furniture woods, a matter of great importance to the polisher. The arts of Staining and Imitating, whereby inferior woods are made to resemble the most costly, are also fully treated, as well as the processes of Enamelling, both in oil-varnishes and French polish, together with the method of decorating the same. The condition of the art of polishing in America is dwelt upon, and various interesting articles written by practical polishers in the States, which appeared in their trade journal, The Cabinet-maker, have been revised and printed in this work. A number of valuable recipes, and other instructive matter, useful alike to the amateur and to the practical workman, are also given.

In consequence of the high price demanded for furniture made of the costly woods, the art of the chemist has been called into requisition to produce upon the inferior woods an analogous effect at a trifling expense. The materials employed in the artificial colouring of wood are both mineral and vegetable; the mineral is the most permanent, and when caused by chemical decomposition within the pores it acts as a preservative agent in a greater or less degree. The vegetable colouring matters do not penetrate so easily, probably on account of the affinity of the woody fibre for the colouring matter, whereby the whole of the latter is taken up by the parts of the wood with which it first comes into contact. Different intermediate shades, in great variety, may be obtained by combinations of colouring matters, according to the tint desired, and the ideas of the stainer. The processes technically known as "grounding and ingraining" are partly chemical and partly mechanical, and are designed to teach the various modes of operation whereby the above effects can be produced. We will commence with

Imitation Mahogany - Half a pound of madder-root, and two ounces of logwood chips boiled in a gallon of water. Brush over while hot; when dry, go over it with a solution of pearlash, a drachm to a pint. Beech or birch, brushed with aquafortis in sweeping regular strokes, and immediately dried in front of a good fire, form very good imitations of old wood. Venetian red mixed with raw linseed-oil also forms a good stain.

The following is a method in common use by French cabinet-makers. The white wood is first brushed over with a diluted solution of nitrous acid; next, with a solution made of methylated spirits one gill, carbonate of soda three-quarters of an ounce, and dragon's blood a quarter of an ounce; and a little red tint is added to the varnish or polish used afterwards. Black American walnut can be made to imitate mahogany by brushing it over with a weak solution of nitric acid.

Imitation Rosewood - Boil half a pound of logwood chips in three pints of water until the decoction is a very dark red; then add an ounce of salt of tartar. Give the work three coats boiling hot; then with a graining tool or a feather fill in the dark markings with the black stain. A stain of a very bright shade can be made with methylated spirits half a gallon, camwood three-quarters of a pound, red-sanders a quarter of a pound, extract of logwood half a pound, aquafortis one ounce. When dissolved, it is ready for use. This makes a very bright ground. It should be applied in three coats over the whole surface, and when dry it is glass-papered down with fine paper to a smooth surface, and is then ready for graining. The fibril veins are produced by passing a graining tool with a slight vibratory motion, so as to effect the natural-looking streaks, using the black stain. A coat of the bichromate of potash solution referred to on page 4 will make wildly-figured mahogany have the appearance of rosewood.

Imitation Walnut - A mixture of two parts of brown umber and one part of sulphuric acid, with spirits of wine or methylated spirits added until it is sufficiently fluid, will serve for white wood. Showy elm-wood, after being delicately darkened with the bichromate solution No. 1, page 4, will pass for walnut; it is usually applied on the cheap loo-table pillars, which are made of elm-wood. Equal portions of the bichromate and carbonate solutions (see page 4), used upon American pine, will have a very good effect.

Another method for imitating walnut is as follows: One part (by weight) of walnut-shell extract is dissolved in six parts of soft-water, and slowly heated to boiling until the solution is complete. The surface to be stained is cleaned and dried, and the solution applied once or twice; when half-dry, the whole is gone over again with one part of chromate of potash boiled in five parts of water. It is then dried, rubbed down, and polished in the ordinary way.

The extract of walnut-shells and chromate of potash are procurable at any large druggist's establishment. A dark-brown is the result of the action of copper salts on the yellow prussiate of potash; the sulphate of copper in soft woods gives a pretty reddish-brown colour, in streaks and shades, and becomes very rich after polishing or varnishing. Different solutions penetrate with different degrees of facility. In applying, for instance, acetate of copper and prussiate of potash to larch, the sap-wood is coloured most when the acetate is introduced first; but when the prussiate is first introduced, the heart-wood is the most deeply coloured. Pyrolignite of iron causes a dark-grey colour in beech, from the action and tannin in the wood on the oxide of iron; while in larch it merely darkens the natural colour. Most of the tints, especially those caused by the prussiates of iron and copper, are improved by the exposure to light, and the richest colours are produced when the process is carried out rapidly.

Imitation Ebony - Take half a gallon of strong vinegar, one pound of extract of logwood, a quarter of a pound of copperas, two ounces of China blue, and one ounce of nut-gall. Put these into an iron pot, and boil them over a slow fire till they are well dissolved. When cool, the mixture is ready for use. Add a gill of iron filings steeped in vinegar. The above makes a perfect jet black, equal to the best black ebony. A very good black is obtained by a solution of sulphate of copper and nitric acid; when dry, the work should have a coat of strong logwood stain.

Imitation Oak - To imitate old oak, the process known as "fumigating" is the best. This is produced by two ounces of American potash and two ounces of pearlash mixed together in a vessel containing one quart of hot water.

Another method is by dissolving a lump of bichromate of potash in warm water; the tint can be varied by adding more water. This is best done out of doors in a good light. Very often in sending for bichromate of potash a mistake is made, and chromate of potash is procured instead; this is of a yellow colour, and will not answer the purpose. The bichromate of potash is the most powerful, and is of a red colour. A solution of asphaltum in spirits of turpentine is frequently used to darken new oak which is intended for painter's varnish, or a coating of boiled oil.

Another method of imitating new oak upon any of the inferior light-coloured woods is to give the surface a coat of Stephens's satin-wood stain, and to draw a soft graining-comb gently over it, and when the streaky appearance is thus produced a camel-hair pencil should be taken and the veins formed with white stain. This is made by digesting three-quarters of an ounce of flake white (subnitrate of bismuth), and about an ounce of isinglass in two gills of boiling water; it can be made thinner by adding more water, or can be slightly tinted if desired.

Proficients in staining and imitating can make American ash so like oak that experienced judges are frequently deceived, the vein and shade of the spurious wood looking nearly as natural as the genuine. After the veining is done, it should be coated with white hard varnish, made rather thin by adding more spirits, after which the ground can be delicately darkened if required.

Imitation Satin-wood - Take methylated spirits one quart, ground turmeric three ounces, powdered gamboge one and a-half ounces. This mixture should be steeped to its full strength, and then strained through fine muslin, when it will be ready for use. Apply with a sponge, and give two coats; when dry, glass-paper down with fine old paper. This makes a good imitation for inside work. By the addition of a little dragon's blood an orange tint can be produced. A yellow colour can also be given to wood by boiling hot solutions of turmeric, Persian berries, fustic, etc. but the colour is very fugitive. A more permanent colour results from nitric acid, and last of all by the successive introduction of acetate of lead and chromate of potash. Sulphate of iron also stains wood of a yellowish colour when used as a preservative agent, so much so, that the use of corrosive sublimate is recommended for this purpose when it is desirable to preserve the light colour.

A Blue Stain - This dye can be obtained by dissolving East Indian indigo in arsenious acid, which will give a dark blue. A lighter blue can be obtained by hot solutions of indigo, of sulphate of copper, and by the successive introduction of pyrolignite of iron and prussiate of potash.

A Green Stain - Dissolve one ounce of Roman vitriol in a quart of boiling water, to which is added one ounce of pearlash; the mixture should then be forcibly agitated, and a small quantity of pulverised yellow arsenic stirred in. A green is also the result of successive formations in the pores of the wood of a blue and a yellow as above indicated, and by a hot solution of acetate of copper in water. A yellowish green may be obtained by the action of copper salts on the red prussiate of potash.

A Purple Stain - Boil one pound of logwood chips in three quarts of water, until the full strength is obtained; then add four ounces of pearlash and two ounces of powdered indigo. When these ingredients are thoroughly dissolved, it is ready for use, either hot or cold. A purple is also obtained by a boiling hot solution of logwood and Brazil-wood, one pound of the former and one quarter of a pound of the latter to a gallon of water.