Vintage wall stand with coat hooks plans

This is a very simple wall stand that you can construct easily and quickly, even in a poorly-equipped workshop. It consists of a back board to which a shelf is adhered. There are two versions of the wall stand at your disposal, the one where the shelf is attached to the top of the back board and the other where it is attached a bit lower and whose back board has a decorative lath glued on top. In both cases, the connection between the shelf and the back board is achieved by a dado & rabbet joint.
 
Vintage wall stand with coat hooks plans

Due to its simple vintage design, this wall stand will fit in almost any interior. Underneath the shelf you can mount hooks for hanging e.g. coats, keys, mugs and the like. Screws are not needed at all (except for the mounting of hooks ), as this wall stand is assembled by gluing.

The documentation contains the drawings of all parts, and the assembly method is given in exploded view. The stand is mounted on the wall with the help of plastic anchors and screws.

 
Vintage wall stand with coat hooks 2D drawings
 
Vintage wall stand with coat hooks 2D drawings

Use this wall stand in the kitchen, bathroom or anywhere else in the house.

The coat hooks for this plan can be bought or made. On page Coat hooks drawings you can find drawings that will help you create them on your own, in case you decide to do so.

Both versions of the wall stand can be made from any of the furniture woods. The kind of wood used will determine the color of the stain for the finish. This also depends on matching other pieces of furniture.

This design, when completed, takes up a wall space 500mm (20in) wide by 159mm (6 1/4in) high, and extends out 149,5mm (5 7/8). The length, height, width and number of hooks can be changed to suit the purpose for which the wall stand is intended.