Four bottle wine rack

Wine has been part of many cultures since around 6000 BC and back then it played an important role in religion rituals. Since then it became one of the most popular drinks in the world, and if you are one of the people that enjoy good glass of wine, you probably know how important the value of the wine rack is.

The wine rack illustrated is easy to built and can be made by the amateur metalworker at very low cost.  It is designed for four bottles but may be easily changed to accommodate a larger or smaller number.

Overall dimensions are: length - 331mm (13.03 in.), width - 198mm (7.8 in.), height - 364mm (14.34 in.)

Material needed:
Part 1 – Mild steel rod – D 8mm (0.31 in.) - Cut length = approximately 625mm (24.6 in)
Part 2  – Steel ball – D30mm (1.18 in. or similar)
Part 3 – Mild steel rod – D 8mm (0.31 in.) - Cut length = approximately 319mm (12.55 in)
Part 4 – Mild steel rod – D 8mm (0.31 in.) - Cut length = approximately 294mm (11.58 in)
Part 5 – Mild steel rod – D 8mm (0.31 in.) - Cut length = 160mm (6.3 in)

All joints are welded. All bends are made cold.

Paint the whole metal structure with the basic preserving color and when it dries out, daub it two times with color for metal. The recommended color is black, because black color gives the impression of a wrought iron to the whole structure and it adjusts well to almost any exterior or interior.
 

Four bottle wine rack plan


  DOWNLOAD COMPLETE PLAN:
Four bottle wine rack plan ( PDF ) - 12 Pages; 2,17Mb


Wine rack plan - Parts list

Four bottle wine rack plan - Parts list


Wine rack plan - Assembly drawing
Four bottle wine rack plan - Assembly drawing

  DOWNLOAD COMPLETE PLAN:
Four bottle wine rack plan ( PDF ) - 12 Pages; 2,17Mb